Welcome to our new store. We've turned it up to 11!

Trustpilot

Monitor Audio IA800-2C 2-Channel Amplifier

Description
Specifications
Documents
Video

The IA800-2C is part of Monitor Audio's Connect Amplifiers division. These amplifiers are controlled via their Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network. 

A800-2C brings our Connect IP interface, which can be accessed by any device connected to the internet with a web browser on the same network. Delivering up to 800 watts per channel, this 2-channel will directly drive 70 V line speakers without a line matching transformer.

Fluently delivering up to 800 watts per channel, this two-channel powerhouse can directly drive 70 V line speakers without a line matching transformer. Each channel has a volume adjustment on the front panel and the 2U high case universally fit into most racks whilst delivering 93% energy efficiency. And even though its likely to live its life on the rack, our design team have produced an especially handsome Installation Amplifier.

Important!

Click here to install the latest IA800-2C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.

FEATURES
Connect' IP Control Yes
Channel Number 2 (1 Stereo Pair)
Power (W / Channel) | 4 ohms 800 W
Power (W / Channel) | 8 ohms 500 W
Power (W / Channel) | Bridge (8 ohms) 2000 W (1CH)
Power (W / Channel) | 70V 800 W (2CH)
Input Impedance 20 K ohms
Output Impedance (Loop RCA) 600 ohms
Input Sensitivity 100 mV / 1 W, 2200 mV – Full power
Maximum Input Voltage 2.9 V
Signal to Noise (SN R)
Frequency Response 5 Hz – 50 kHz
Total Harmonic Distortion THD + N@1 KHz 0.0003
IP Communication TCP/IP (RJ-45 10/100 Base T)
Mains Operating Voltage 100 –120 V @ 60 Hz, 220 – 240 V @ 50 Hz
Fuse Rating 15 A (T15AL ~ 250VAC)
Standby Power Consumption <0.5 W (green mode)
Networked Standby Power Consumption <2 W
DIMENSIONS
Rack Height 2U
Dimensions (Without Feet (H x W x D)) 86.8 x 438 x 438 mm
Height (with feet) 97.2 x 438 x 438 mm
Width (including rack brackets) 482 mm
Weight 9.2 kg

Download the manual.

Monitor Audio IA800-2C 2-Channel Amplifier

Product form

£1,799.00

Availability

Out of stock

This product is now out of stock and discontinued. Please take a look at some of our alternative products or contact us for further assistance.

  • DPD 1 hour delivery timeslot
  • Expert aftersales support

    Bundle Options

    Description
    Specifications
    Documents
    Video

    The IA800-2C is part of Monitor Audio's Connect Amplifiers division. These amplifiers are controlled via their Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network. 

    A800-2C brings our Connect IP interface, which can be accessed by any device connected to the internet with a web browser on the same network. Delivering up to 800 watts per channel, this 2-channel will directly drive 70 V line speakers without a line matching transformer.

    Fluently delivering up to 800 watts per channel, this two-channel powerhouse can directly drive 70 V line speakers without a line matching transformer. Each channel has a volume adjustment on the front panel and the 2U high case universally fit into most racks whilst delivering 93% energy efficiency. And even though its likely to live its life on the rack, our design team have produced an especially handsome Installation Amplifier.

    Important!

    Click here to install the latest IA800-2C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.

    FEATURES
    Connect' IP Control Yes
    Channel Number 2 (1 Stereo Pair)
    Power (W / Channel) | 4 ohms 800 W
    Power (W / Channel) | 8 ohms 500 W
    Power (W / Channel) | Bridge (8 ohms) 2000 W (1CH)
    Power (W / Channel) | 70V 800 W (2CH)
    Input Impedance 20 K ohms
    Output Impedance (Loop RCA) 600 ohms
    Input Sensitivity 100 mV / 1 W, 2200 mV – Full power
    Maximum Input Voltage 2.9 V
    Signal to Noise (SN R)
    Frequency Response 5 Hz – 50 kHz
    Total Harmonic Distortion THD + N@1 KHz 0.0003
    IP Communication TCP/IP (RJ-45 10/100 Base T)
    Mains Operating Voltage 100 –120 V @ 60 Hz, 220 – 240 V @ 50 Hz
    Fuse Rating 15 A (T15AL ~ 250VAC)
    Standby Power Consumption <0.5 W (green mode)
    Networked Standby Power Consumption <2 W
    DIMENSIONS
    Rack Height 2U
    Dimensions (Without Feet (H x W x D)) 86.8 x 438 x 438 mm
    Height (with feet) 97.2 x 438 x 438 mm
    Width (including rack brackets) 482 mm
    Weight 9.2 kg

    Download the manual.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Send us a message!

    Contact us

    Login

    Forgot your password?

    Don't have an account yet?
    Create account