Welcome to our new store. We've turned it up to 11!

Trustpilot

Monitor Audio IA200-2C 2-Channel Amplifier

tagged music
Description
Specifications
Documents
Video

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises their Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network. 

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. A ‘Connect’ amplifier, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

Important!

Click here to install the latest IA200-2C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.

FEATURES
Connect' IP Control Yes
Channel Number 2 (1 Stereo Pair)
Power (W / Channel) | 4 ohms 200 W
Power (W / Channel) | 8 ohms 150 W
Power (W / Channel) | Bridge (8 ohms) 470 W (1CH)
Input Impedance 20 K ohms
Output Impedance (Loop RCA) 600 ohms
Input Sensitivity 100 mV / 1 W, 1230 mV – Full power
Maximum Input Voltage 2.9 V
Signal to Noise (SN R)
Frequency Response 5 Hz – 50 kHz
Total Harmonic Distortion THD + N@1 KHz 0.0003
IP Communication TCP/IP (RJ 45 10/100 Base T)
Mains Operating Voltage 100 – 120 V @ 60 Hz, 220 – 240 V @ 50 Hz
Fuse Rating 5 A (T5AL ~ 250VAC)
Standby Power Consumption <0.5 W (green mode)
Networked Standby Power Consumption <2 W
DIMENSIONS
Rack Height 1U
Dimensions (Without Feet (H x W x D)) 42.4 x 438 x 427 mm
Dimensions (With Feet (H x W x D)) 52.8 x 438 x 427 mm
Width (including rack brackets) 482 mm
Weight 5.3 kg

Download the manual.

Monitor Audio IA200-2C 2-Channel Amplifier

Product form

£1,089.00

Availability

Out of stock

This product is now out of stock and discontinued. Please take a look at some of our alternative products or contact us for further assistance.

  • DPD 1 hour delivery timeslot
  • Expert aftersales support

    Bundle Options

    Description
    Specifications
    Documents
    Video

    The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises their Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network. 

    A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

    The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. A ‘Connect’ amplifier, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

    Important!

    Click here to install the latest IA200-2C firmware. Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.

    FEATURES
    Connect' IP Control Yes
    Channel Number 2 (1 Stereo Pair)
    Power (W / Channel) | 4 ohms 200 W
    Power (W / Channel) | 8 ohms 150 W
    Power (W / Channel) | Bridge (8 ohms) 470 W (1CH)
    Input Impedance 20 K ohms
    Output Impedance (Loop RCA) 600 ohms
    Input Sensitivity 100 mV / 1 W, 1230 mV – Full power
    Maximum Input Voltage 2.9 V
    Signal to Noise (SN R)
    Frequency Response 5 Hz – 50 kHz
    Total Harmonic Distortion THD + N@1 KHz 0.0003
    IP Communication TCP/IP (RJ 45 10/100 Base T)
    Mains Operating Voltage 100 – 120 V @ 60 Hz, 220 – 240 V @ 50 Hz
    Fuse Rating 5 A (T5AL ~ 250VAC)
    Standby Power Consumption <0.5 W (green mode)
    Networked Standby Power Consumption <2 W
    DIMENSIONS
    Rack Height 1U
    Dimensions (Without Feet (H x W x D)) 42.4 x 438 x 427 mm
    Dimensions (With Feet (H x W x D)) 52.8 x 438 x 427 mm
    Width (including rack brackets) 482 mm
    Weight 5.3 kg

    Download the manual.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Send us a message!

    Contact us

    Login

    Forgot your password?

    Don't have an account yet?
    Create account