Trustpilot

Monitor Audio Vestra W12 Subwoofer

tagged active tagged driver-12 tagged music tagged cinema
Description
Specifications
Documents
Video

The Vestra W12 Subwoofer is built to deliver uncompromising bass performance, perfect for any high-fidelity setup as a standalone item or in multiples for the ultimate fully immersive AV experience. The W12 delivers a potent combination of power, precision, and seamless design. Utilising Clever DSP (Digital Signal Processing) enhances customisation, allowing you to fine-tune the bass response to your space.

The Vestra W12’s sealed-enclosure design houses a 12-inch C-CAM (Ceramic-Coated Aluminium Magnesium) high linear-excursion driver featuring triple-layer suspension for greater control and ensuring precise, powerful bass with minimal distortion. Supported by a robust 500-watt Class-D amplifier and a rigid, acoustically optimised enclosure, the W12 delivers deep, impactful lows that remain clear and controlled at all listening levels.

Features

  • High linear-excursion C-CAM (Ceramic Coated aluminium Magnesium) driver
  • Triple suspension driver
  • 500-Watt Class-D Amplifier
  • Sealed-Enclosure
  • Three EQ pre-set modes
  • Stereo unbalanced RCA inputs
  • LFE unbalanced RCA inputs
  • 12 Volt trigger
  • 3.5mm mono jack
System Format Active
Frequency Response (In-room, -6dB) 17 — 200 Hz
Maximum Usable SPL - Peak (CTA 2010-B, Z-weighted, half-space) 115 dB
Amplifier Output Instantaneous (RMS) 500 W
Amplifier Classification High-Efficiency Class-D
Bass Alignment Sealed
Low Pass Filter Frequency (-6dB) 32 — 200 Hz
Inputs Stereo Unbalanced RCA
LFE Unbalanced RCA
12 V Trigger 3.5 mm mono jack
Input Impedance 47 kOhms
Phase Control 0° & 180° Toggle Switch
Equalisation DSP 3 pre-set modes: Impact, Movie, Music
Auto Music Sensing Auto On: Line Level >3 mV | Auto Standby after 20 mins
Mains Input Voltage Universal Mains, 85 - 265 VAC, 50 - 60 Hz
Power Consumption (1/8th Maximum Output) 120 W
Drive Unit Complement 1x 12" (305 mm) High Linear-Excusion Triple Suspension Driver
External Dimensions with all accessories fitted (H x W x D) 385 x 371 x 401 mm (151/8 x 149/16 x 1513/16")
Weight 18.3 kg
Grille Cloth covered
Warranty 5 years

Monitor Audio Vestra W12 Subwoofer

Product form

£749.00

Availability

Available to order

Normally available in 2-3 working days

    The Vestra W12 Subwoofer is built to deliver uncompromising bass performance, perfect for any high-fidelity setup as a standalone item or in multiples for the ultimate fully immersive AV experience. The W12 delivers a potent combination of power, precision, and seamless design. Utilising Clever DSP (Digital Signal Processing) enhances customisation, allowing you to fine-tune the bass response to your space.

    The Vestra W12’s sealed-enclosure design houses a 12-inch C-CAM (Ceramic-Coated Aluminium Magnesium) high linear-excursion driver featuring triple-layer suspension for greater control and ensuring precise, powerful bass with minimal distortion. Supported by a robust 500-watt Class-D amplifier and a rigid, acoustically optimised enclosure, the W12 delivers deep, impactful lows that remain clear and controlled at all listening levels.

    Features

    • High linear-excursion C-CAM (Ceramic Coated aluminium Magnesium) driver
    • Triple suspension driver
    • 500-Watt Class-D Amplifier
    • Sealed-Enclosure
    • Three EQ pre-set modes
    • Stereo unbalanced RCA inputs
    • LFE unbalanced RCA inputs
    • 12 Volt trigger
    • 3.5mm mono jack
    System Format Active
    Frequency Response (In-room, -6dB) 17 — 200 Hz
    Maximum Usable SPL - Peak (CTA 2010-B, Z-weighted, half-space) 115 dB
    Amplifier Output Instantaneous (RMS) 500 W
    Amplifier Classification High-Efficiency Class-D
    Bass Alignment Sealed
    Low Pass Filter Frequency (-6dB) 32 — 200 Hz
    Inputs Stereo Unbalanced RCA
    LFE Unbalanced RCA
    12 V Trigger 3.5 mm mono jack
    Input Impedance 47 kOhms
    Phase Control 0° & 180° Toggle Switch
    Equalisation DSP 3 pre-set modes: Impact, Movie, Music
    Auto Music Sensing Auto On: Line Level >3 mV | Auto Standby after 20 mins
    Mains Input Voltage Universal Mains, 85 - 265 VAC, 50 - 60 Hz
    Power Consumption (1/8th Maximum Output) 120 W
    Drive Unit Complement 1x 12" (305 mm) High Linear-Excusion Triple Suspension Driver
    External Dimensions with all accessories fitted (H x W x D) 385 x 371 x 401 mm (151/8 x 149/16 x 1513/16")
    Weight 18.3 kg
    Grille Cloth covered
    Warranty 5 years

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Send us a message!

    Contact us

    Login

    Forgot your password?

    Don't have an account yet?
    Create account